Security Notice: Fraudulent emails impersonating GSR

Our systems have not been compromised. Please check sender addresses carefully: all GSR emails end with @ventiltechnik.de

Here you can book an appointment with our sales department.

DRIVE TYPE

Force pilot operated valves

Valves of this type switch from 0 bar and can also be used where direct acting valves are applied. However, they are supplied with smaller solenoids for higher pressures and larger nominal diameters beyond their range of application.

	Series	Design	Inter thread Seat diameter	Flange	Pressure range	Housing material	Medium temperature	Downloads
	43	2/2-way valve with diaphragm seal	G1/4-G2 13.5-50 mm	-	0-16 bar	Brass 2.0402 Stainless steel 1.4581	-10 °C/+80 °C	Download
	27	2/2-way valve with diaphragm seal	-	DN15-DN150	0-16 bar	Spheroidal cast iron EN-GJS-400-18-LT (DN150) Cast iron EN-GJL-250 (DN20-150) Stainless steel 1.4581 (DN15-50) Cast steel GP240 GH (DN15-100)	-10 °C/+80 °C	Download
	35	2/2-way valve with piston seal	G1/4-G3 13.5-80 mm	-	0-40 bar	Brass 2.0402 Stainless steel 1.4581	-40 °C/+80 °C	Download
	37	2/2-way valve with piston seal	-	DN15-DN50	0-40 bar	Cast iron EN-GJL-250 Cast steel GP240 GH Stainless steel 1.4581	-40 °C/+80 °C	Download
	24	2/2-way valve with piston seal	-	DN65-DN300	0-40 bar	Spheroidal cast iron EN-GJS-400-19-LT Cast iron EN-GJL-250 Cast steel GP240 GH Stainless steel 1.4581	-30 °C/+80 °C	Download
	39	2/2-way valve with diaphragm seal	G1/2-G3/4 15-20 mm	-	0-6 bar	PA66	0 °C/+40 °C	Download